PT300 Plug-in Thermostat
PT300 Plug-in Thermostat
Couldn't load pickup availability
made in USA
FREE SHIPPING
30-DAY MONEYBACK GUARANTEE
PT300 5-2 DAY HEATING & COOLING PROGRAMMABLE PLUG-IN THERMOSTAT FOR 120 VOLT OUTLETS
The PT300 (PSP300) is designed for our plug-in, wall mounted heaters. Rated for 120 Volt, 15 Amps, 1800 Watts this easy to use thermostat is capable of controlling the envi (500 watt), and enviMAX (1000 watt) heaters. The PT300 installs in seconds and is ready to use right out of the box! No wiring is required simply plug the PT300 into any 120 Volt wall outlet, plug your envi wall mounted heater into the outlet located on the front of the PT300, and you are ready to go.
Features:
- Clean, Attractive Design
- Easy-to-Use Speed Dial
- Energy Star Compliant
- ETL Safety Approved
- Vertical Orientation
- Setting Range 45°F to 90°F (7°C to 32°C)
- F/C Selectable
- Temporary Temperature Override
- Manual Hold
- 12 Hour Clock Only
- User Temperature Calibration
- Adjustable Temperature Differential/Cycle Rate
- Mode Slide Switch
- Positive On/Off Switch
- 120VAC Outlet Powered
- 2 G13A Size 1.5V Alkaline Batteries Included(for clock only)
- Battery Free Memory Storage
- 5 Minute Compressor Delay
- Time and Temperature Alternate in Display
- On-Screen Low Battery Indicator
- Soft Touch Buttons

- 5 stars: 44 (80%)
- 4 stars: 8 (15%)
- 3 stars: 3 (5%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Once I studied this thermostat and instructions I finally could program it to my requirements. Love the fact it doesn't have to run all the time now.
Well it could be a 5 except I had to call in to understand how to set it up but works great. Turns unit on and off everyday st scheduled times
We love the product and the heater works perfectly in a large room with high ceilings!! Most of all it is made in the USA
This Thermostat works great with the EVO 300 Wall Heater.
Set the time, day and daily temperature settings and you're all set.
Easy-to-use
This plug in Thermostat works great with the Envi 120v plug in wall heater.
Easy to set up.
Set time, date and daily temperature requirements all set.
No thermostat is extremely easy to use and brings the wall heater a step up. Definitely recommend it.
If you are considering buying an eheat wall heater with the plug in cord, getting the PT300 thermostat I highly recommend. It adds to the efficiency in the way the heater works.
I purchase the envy wall plug - in heater along with the plug-in thermostat. The two together offer a perfect no-touch heat solution. The HVAC system failed that heated the apartment above my barn. I installed an envy heater in each room instead of replacing the very expense HVAC system. The renter couldn't be happier.
This thermostat works extremely well. We have 4 Envi heaters and all of them operate on these thermostats. As a result they accurately maintain the desired temperatures for the spaces they're in. I was never able to satisfactorily regulate the temperature with the thermostat built into the heaters but the plug-in does the trick. Perfect solution.
I have 3 thermostats and Envi heaters in use in the lower level of our house... the thermostats work really well in keeping the rooms comfortable without overworking the heaters... a great assist to the main gas furnace
This is the third wall heater that we have purchased. We planned on using it in a downstairs bedroom but our daughter was interested in getting one for the front entrance to her small home. We decided to gift this one to her and she is extremely pleased with how it warms up her unheated entryway. We placed heaters in our unheated office, master bathroom and also put our original heater in the unheated sunroom where our cat sleeps. They are a great addition to our heating system that is partially fueled by new solar panels. This month's energy bill was slightly over $14 for a 5,000 sq. ft house.
Works great. I am now able to control my room temperature much better now. Before the room was always too warm.
It is nice to be able to set a desired temperature and it actually is set. Well worth the cost.
Since the e heater is mounted close to the floor, the thermostat is also necessarily close to the floor. I have to get on my hands and needs to read the temperature in the room because the display isn't backlit. At my age, that's a project! Seems silly that it isn't backlit or touch screen lit
However, the only reason I bought the thermostat was because I was disappointed with the heat control on the unit itself: At the "Low" setting, the unit was not shutting off until about 65 degrees - WAY higher than I was led to believe it should. And unfortunately, I didn't try it until after 30 days, so I couldn't exchange it easily.
Great product so far. Very easy to use, keeps temp within 1 degree of setting.
Great product so far. Very easy to use, keeps temp within 1 degree of setting.
I purchased this so my heater would shut off at a programmed desired temperature and it meet all my expectations.. thank you for making such a great product
World's Number One Wall Mounted Panel Heater

World's Number One Wall Mounted Panel Heater
Get yours today and join the 300,000+ Satisfied Customers






Why Choose Envi?
It’s a growing ecosystem of intelligent, American-made comfort solutions for every season. Whether you're heating a single room or managing an entire home, the Envi® brand is your gateway to American-made, energy-smart climate control—with local support, future-ready tech, and no-compromise performance.
Get Yours Today and Join
300,000+ Satisfied Customers
Greatest heater ever!!
"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."