Envi 220v Hardwired Electric Panel Wall Heater - 500 Watts - 3rd Gen (LE5022D)

(38 reviews) Write a Review

The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.

38 Reviews Hide Reviews Show Reviews

5
Perfect for our kitchen

Needed a little extra heat in our kitchen and this gave us what we needed.

Paul posted on 17th Nov 2021
5
Would buy again - amazing heater

I now own five of these units. We recently remodeled our house and did away with the fuel oil furnace and replaced it with a ventless propane heater. I bought these Envi heaters for the bedrooms, bathrooms and laundry. They work great. It is a nice, even heat and each room can be individually controlled.

Don posted on 17th Nov 2021
5
Great Quality Heater

I bought 4 of the Envi 220v hardwired heaters for a 600 sq ft area of our basement that I was finishing. I was impressed by many factors of this product. Right out of the gate I received the heaters within 4 days of ordering them. Their build quality is great. It is so refreshing to purchase a product that is easy to install, everything lines up exactly as it is supposed to, it includes all the parts needed to install it (even a fool-proof template for attaching it to the wall), and most importantly is a not a disappointing cheaply made heater. The heaters have been installed and in operation for about a week now. The heaters do give off an odor when first turned on but that only lasted for about 6 hours as they are broken in (instructions tell you to initially run heaters full blast for 48+ hours). After the initial burn in the odor is gone and the heaters silently do the job. Oh yeah did I mention that they look great on the walls! This is a true quality Made in the USA heater and I would not hesitate to recommend them!! Kudos to the whole team at eheat! Thanks!!!

Ralph V posted on 17th Nov 2021
5
Replacing Electric Baseboard Heating

I bought 2 E Heat units to replace electric baseboard heaters. The are working so well that I will be ordering 3 more units to do away with the rest of the baseboard heaters. I am replacing my baseboard heating for more than 1 reason, first they are attractive and take up minimum room. Second the heat is quite and cleaner. Third is how much safer these units are.

Jim R posted on 17th Nov 2021
4
A great alternative to the old electric register

I'm am electrician for over 50 years now. I have been installing your envi heaters for a few years now, all my customers are pleased with the way they work and the cost savings every month on there utility bills, keep up the good work

John D posted on 17th Nov 2021
5
Top notch quality, service and US based company

I could not believe the style, packaging and quality of the heater. The carton is a perfect template to install the heater. Easy install and use. The customer service is second to none. HIGHLY RECOMMEND this heater.

Mark R posted on 17th Nov 2021
5
So nice!

I just replaced two cadet heaters with the eheat ones. I'm very impressed with how easy it was to install them and how great they look. I plan to order three more for the bedrooms. I'm very happy with them.

Gail G posted on 17th Nov 2021
5
super efficient

I am a landlord and have 14 of these across various apartments. High quality, cheap heat, very much recommend.

KEVIN S posted on 17th Nov 2021
5
Works great

Installed this unit in my bathroom and it has performed very well.

Jeff posted on 17th Nov 2021

$179.95

made in USA

Shipping:

Free Shipping

UPC:: 860003321355
Availability:: In Stock (Shipping Same To Next Business Day)
Weight:: 15.00 LBS
Shipping:: Calculated at Checkout
CutSheet:: https://www.eheat.com/content/upload/Envi-Gen3-Cut-Sheet-SG.pdf
Wattage:: 500 Watts
Size:: 19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
Weight:: 10 lbs (shipped weight 15lbs)
Color:: Luxury White
Thermostat:: Manual
Cordset:: Hardwired
Voltage:: 220V
Ampere:: 2.27 Amps
Condition:: New

Quantity:

Adding to cart… The item has been added

Current Stock: 8072 UNITS LEFT

Availability:

In Stock (Shipping Same To Next Business Day)

FREE SHIPPING
30-DAY MONEYBACK GUARANTEE
3-YEAR WARRANTY*
*selected heaters only

38 Reviews Hide Reviews Show Reviews

5
Perfect for our kitchen

Needed a little extra heat in our kitchen and this gave us what we needed.

Paul posted on 17th Nov 2021
5
Would buy again - amazing heater

I now own five of these units. We recently remodeled our house and did away with the fuel oil furnace and replaced it with a ventless propane heater. I bought these Envi heaters for the bedrooms, bathrooms and laundry. They work great. It is a nice, even heat and each room can be individually controlled.

Don posted on 17th Nov 2021
5
Great Quality Heater

I bought 4 of the Envi 220v hardwired heaters for a 600 sq ft area of our basement that I was finishing. I was impressed by many factors of this product. Right out of the gate I received the heaters within 4 days of ordering them. Their build quality is great. It is so refreshing to purchase a product that is easy to install, everything lines up exactly as it is supposed to, it includes all the parts needed to install it (even a fool-proof template for attaching it to the wall), and most importantly is a not a disappointing cheaply made heater. The heaters have been installed and in operation for about a week now. The heaters do give off an odor when first turned on but that only lasted for about 6 hours as they are broken in (instructions tell you to initially run heaters full blast for 48+ hours). After the initial burn in the odor is gone and the heaters silently do the job. Oh yeah did I mention that they look great on the walls! This is a true quality Made in the USA heater and I would not hesitate to recommend them!! Kudos to the whole team at eheat! Thanks!!!

Ralph V posted on 17th Nov 2021
5
Replacing Electric Baseboard Heating

I bought 2 E Heat units to replace electric baseboard heaters. The are working so well that I will be ordering 3 more units to do away with the rest of the baseboard heaters. I am replacing my baseboard heating for more than 1 reason, first they are attractive and take up minimum room. Second the heat is quite and cleaner. Third is how much safer these units are.

Jim R posted on 17th Nov 2021
4
A great alternative to the old electric register

I'm am electrician for over 50 years now. I have been installing your envi heaters for a few years now, all my customers are pleased with the way they work and the cost savings every month on there utility bills, keep up the good work

John D posted on 17th Nov 2021
5
Top notch quality, service and US based company

I could not believe the style, packaging and quality of the heater. The carton is a perfect template to install the heater. Easy install and use. The customer service is second to none. HIGHLY RECOMMEND this heater.

Mark R posted on 17th Nov 2021
5
So nice!

I just replaced two cadet heaters with the eheat ones. I'm very impressed with how easy it was to install them and how great they look. I plan to order three more for the bedrooms. I'm very happy with them.

Gail G posted on 17th Nov 2021
5
super efficient

I am a landlord and have 14 of these across various apartments. High quality, cheap heat, very much recommend.

KEVIN S posted on 17th Nov 2021
5
Works great

Installed this unit in my bathroom and it has performed very well.

Jeff posted on 17th Nov 2021

Specifications

Brand
eheat, Inc.
SKU
LE5022D
ShortDescription
The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
CutSheet
https://www.eheat.com/content/upload/Envi-Gen3-Cut-Sheet-SG.pdf
Wattage
500 Watts
Size
19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
Weight
10 lbs (shipped weight 15lbs)
Color
Luxury White
Thermostat
Manual
Cordset
Hardwired
Voltage
220V
Ampere
2.27 Amps
Condition
New

CLICK HERE FOR SPEC SHEET

Description

IN STOCK!

Introducing the brand new 3rd Generation Envi heater! The LE5022D is a direct replacement to the HW3022T & HW1022T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls, and is an all-around better heater. The LE5022D Envi Heater is a 220volt hardwired whole room heater and has a built in thermostat.

FEATURES OF ENVI HEATER MODELS:

True Temperature-Controlling Thermostat. (Only models LE5012P, LE5012D, LE5022D)
Wall-Sens(TM) Technology, safely cuts power to heater if it is removed from the wall. (All models)
500 watts - low wattage convection heating that doesn't dry out the air, won't trip the breaker but is still powerful enough to heat a 130sf to 150sf rooms.
Convenient Cordset storage inside heater to tuck away untidy power cord. (only Plug-in models)
Hardwired models also available, approved for commercial installation. (LE5012D/LE5022D)
Conforms to UL & CSA (Canadian) safety standards (All models).
Available in Canada also. If you live in are in Canada, please click on www.eheat.com/canada to receive FREE SHIPPING to any location in Canada!

The Technology

The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.

Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design. Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater. This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater. The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.

The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!

What are the Benefits?

Economical - low wattage technology (only 500 watts). Costs as little as 4-5 cents an hour to run.
Efficient - 100% Pure Convection Heating
Innovative - New Patented Stack Convection Technology
Safe for children, seniors, and pets - Cool-to-the-touch (90°F), Wall-Sens(TM) technology and automatic thermal cutoff
Simple to install - Installs in minutes, no drilling required
Slim - Just 2 inches thin
Stylish – Beautiful flowing curves compliment any room interior
Healthy - Fanless, non-forced air design that doesn't blow dust or allergens into the air and around the room.
Sleep friendly - Silent and auto dimming on/off power light in dark rooms, is helpful for light sleepers.
American Owned & Built – High Build Quality – ISO 9001 Quality Control Factory Certification
Heats Room Size – 130 to 150 square feet
Built in Thermostat - Better temperature control
Sturdy & Crack Resistant – high tech 21st Century durable materials will not crack or separate at the seams.
Industry Leading Warranty – 3 years
Easy to clean – smooth wipe clean surface
Cord Storage - Cordset can be stored inside the heater for a more attractive look.
Hardwired Approved - Hardwired models are certified and approved for permanent electrical installation under UL Safety Listing 2021. The Envi heater finally answers the need for a legal and safe, hardwired electric panel heater. (Models LE5012D, LE5022D)

Please review our Return Policy before placing an order.

Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.

*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.

38 Reviews Hide Reviews Show Reviews

5
Perfect for our kitchen

Needed a little extra heat in our kitchen and this gave us what we needed.

Paul posted on 17th Nov 2021
5
Would buy again - amazing heater

I now own five of these units. We recently remodeled our house and did away with the fuel oil furnace and replaced it with a ventless propane heater. I bought these Envi heaters for the bedrooms, bathrooms and laundry. They work great. It is a nice, even heat and each room can be individually controlled.

Don posted on 17th Nov 2021
5
Great Quality Heater

I bought 4 of the Envi 220v hardwired heaters for a 600 sq ft area of our basement that I was finishing. I was impressed by many factors of this product. Right out of the gate I received the heaters within 4 days of ordering them. Their build quality is great. It is so refreshing to purchase a product that is easy to install, everything lines up exactly as it is supposed to, it includes all the parts needed to install it (even a fool-proof template for attaching it to the wall), and most importantly is a not a disappointing cheaply made heater. The heaters have been installed and in operation for about a week now. The heaters do give off an odor when first turned on but that only lasted for about 6 hours as they are broken in (instructions tell you to initially run heaters full blast for 48+ hours). After the initial burn in the odor is gone and the heaters silently do the job. Oh yeah did I mention that they look great on the walls! This is a true quality Made in the USA heater and I would not hesitate to recommend them!! Kudos to the whole team at eheat! Thanks!!!

Ralph V posted on 17th Nov 2021
5
Replacing Electric Baseboard Heating

I bought 2 E Heat units to replace electric baseboard heaters. The are working so well that I will be ordering 3 more units to do away with the rest of the baseboard heaters. I am replacing my baseboard heating for more than 1 reason, first they are attractive and take up minimum room. Second the heat is quite and cleaner. Third is how much safer these units are.

Jim R posted on 17th Nov 2021
4
A great alternative to the old electric register

I'm am electrician for over 50 years now. I have been installing your envi heaters for a few years now, all my customers are pleased with the way they work and the cost savings every month on there utility bills, keep up the good work

John D posted on 17th Nov 2021
5
Top notch quality, service and US based company

I could not believe the style, packaging and quality of the heater. The carton is a perfect template to install the heater. Easy install and use. The customer service is second to none. HIGHLY RECOMMEND this heater.

Mark R posted on 17th Nov 2021
5
So nice!

I just replaced two cadet heaters with the eheat ones. I'm very impressed with how easy it was to install them and how great they look. I plan to order three more for the bedrooms. I'm very happy with them.

Gail G posted on 17th Nov 2021
5
super efficient

I am a landlord and have 14 of these across various apartments. High quality, cheap heat, very much recommend.

KEVIN S posted on 17th Nov 2021
5
Works great

Installed this unit in my bathroom and it has performed very well.

Jeff posted on 17th Nov 2021

Specifications

Brand
eheat, Inc.
SKU
LE5022D
ShortDescription
The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
CutSheet
https://www.eheat.com/content/upload/Envi-Gen3-Cut-Sheet-SG.pdf
Wattage
500 Watts
Size
19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
Weight
10 lbs (shipped weight 15lbs)
Color
Luxury White
Thermostat
Manual
Cordset
Hardwired
Voltage
220V
Ampere
2.27 Amps
Condition
New

CLICK HERE FOR SPEC SHEET

How It Works

The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.

The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!

BUY ENVI NOW

See How Easy the Envi Wall Mounted Panel Heater is to Install Yourself

Worried about paying to get a contractor to install your new Envi wall heater? Think again. Jason Cameron explains how the Envi wall heater is designed to be installed and set up at home by yourself in just 10 minutes or less.

BUY ENVI NOW

Get Yours Today and Join

300,000+ Satisfied Customers

Greatest heater ever!!

"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."