Envi 120v Hardwired Electric Panel Wall Heater - 500 Watts - 3rd Gen (LE5012D)

(40 reviews) Write a Review

The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.

40 Reviews Hide Reviews Show Reviews

  • 5
    LE5012D 500 Watt panel Wall Heater

    I have bought two of these and they are grate, very easy to install and the mounting guide was dead on. I would highly recommend this product to anyone looking for a wall heater.

    Thomas Smith posted on 25th Aug 2024

  • 5
    Envi 120v Hardwired Electric Panel Wall Heater

    I needed to add a heater in small bathroom. Very elegant solution. Easy purchase and installation. Very highly recommanded.

    Bruce posted on 1st Feb 2024

  • 5
    Envi electric panel wall heater

    Very pleased with this product. Absolutely noiseless, perfect look, does a great job of supplementing the small radiator in the room. We read that there was a smell when first starting up - we detected only a VERY SLIGHT odor, not offensive and it disappeared within a few minutes. Not an issue at all. If we needed another I would not hesitate to purchase again.

    john w posted on 11th Dec 2023

  • 5
    E heat

    A nice clean design. Simple installation and quiet.

    Lyn Gates posted on 10th Dec 2023

  • 5
    New restroom heater

    Works great in our new restroom at our art studios. Keeps the 8’x14’room very comfortable for our customers.

    Billy Butherus posted on 2nd Dec 2023

  • 5
    ENVI 120V Hardwired

    These are the best electric wall heaters super easy to mount on the wall, super quiet and keeps the room cozy warm. I have 3 of them - front entry, basement and 2nd story. Highly recommend this heater.

    Kathy posted on 26th Nov 2023

  • 5
    Super Efficient.

    These are my go to heaters especially when overall power is limited. Not as quick to heat a room as a forced fan unit, but the efficiency and heat output put this heaters capabilities well above its watt class.

    Rick Sikes posted on 16th Oct 2023

  • 5
    Great product

    Great price, quick delivery and well packaged that protects the unit well. Well made and easy to install. I will use this product again.

    Robert Fairchild posted on 27th Sep 2023

  • 5
    • Envi 120v Hardwired Electric Panel Wall Heater - 3rd Generation (LE501

    Works great. Puts out good amount of heat noiselessly. We use ours in our master bath. It replaced a similar model that wore out after 12 years.

    Sharon Tadrowski posted on 16th Feb 2023

$179.95
made in USA
Shipping:
Free Shipping
UPC:
860003321362
Availability:
In Stock (Shipping Same To Next Business Day)
Weight:
15.00 LBS
Shipping:
Calculated at Checkout
CutSheet:
https://www.eheat.com/content/upload/Envi-Gen3-Cut-Sheet-SG.pdf
Wattage:
500 Watts
Size:
19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
Weight:
10 lbs (shipped weight 15lbs)
Color:
Luxury White
Thermostat:
Manual
Cordset:
Hardwired
Voltage:
120V
Ampere:
4.17 Amps
Condition:
New
Adding to cart… The item has been added
Availability:
In Stock (Shipping Same To Next Business Day)
  • pro-icon-1 FREE SHIPPING
  • pro-icon-2 30-DAY MONEYBACK GUARANTEE
  • pro-icon-3
    3-YEAR WARRANTY*

    *selected heaters only

Description

IN STOCK!

Introducing the brand new 3rd Generation Envi heater! The LE5012D is a direct replacement to the HW3012T & HW1012T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls, and is an all-around better heater. The LE5012D Envi Heater is a 120volt hardwired whole room heater and has a built in thermostat.

FEATURES OF ENVI HEATER MODELS:

  • True Temperature-Controlling Thermostat. (Only models LE5012PLE5012DLE5022D)
  • Wall-Sens(TM) Technology, safely cuts power to heater if it is removed from the wall. (All models)
  • 500 watts - low wattage convection heating that doesn't dry out the air, won't trip the breaker but is still powerful enough to heat a 130sf to 150sf rooms.
  • Convenient Cordset storage inside heater to tuck away untidy power cord. (only Plug-in models)
  • Hardwired models also available, approved for commercial installation. (LE5012D/LE5022D)
  • Conforms to UL & CSA (Canadian) safety standards (All models).
  • Available in Canada also. If you live in are in Canada, please click on www.eheat.com/canada to receive FREE SHIPPING to any location in Canada!

The Technology

The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.

Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design.  Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater.  This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater.  The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.

The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!

What are the Benefits?

  • Economical - low wattage technology (only 500 watts). Costs as little as 4-5 cents an hour to run.
  • Efficient - 100% Pure Convection Heating
  • Innovative - New Patented Stack Convection Technology
  • Safe for children, seniors, and pets - Cool-to-the-touch (90°F), Wall-Sens(TM) technology and automatic thermal cutoff
  • Simple to install  - Installs in minutes, no drilling required
  • Slim - Just 2 inches thin
  • Stylish – Beautiful flowing curves compliment any room interior
  • Healthy - Fanless, non-forced air design that doesn't blow dust or allergens into the air and around the room.
  • Sleep friendly - Silent and auto dimming on/off power light in dark rooms, is helpful for light sleepers.
  • American Owned & Built – High Build Quality – ISO 9001 Quality Control Factory Certification
  • Heats Room Size – 130 to 150 square feet
  • Built in Thermostat - Better temperature control
  • Sturdy & Crack Resistant – high tech 21st Century durable materials will not crack or separate at the seams.
  • Industry Leading Warranty – 3 years
  • Easy to clean – smooth wipe clean surface
  • Cord Storage - Cordset can be stored inside the heater for a more attractive look.
  • Hardwired Approved - Hardwired models are certified and approved for permanent electrical installation under UL Safety Listing 2021. The Envi heater finally answers the need for a legal and safe, hardwired electric panel heater. (Models LE5012D, LE5022D)

Please review our Return Policy before placing an order.

Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.

*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.

Specifications

  • Brand

    eheat, Inc.
  • SKU

    LE5012D
  • ShortDescription

    The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
  • CutSheet

    https://www.eheat.com/content/upload/Envi-Gen3-Cut-Sheet-SG.pdf
  • Wattage

    500 Watts
  • Size

    19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
  • Weight

    10 lbs (shipped weight 15lbs)
  • Color

    Luxury White
  • Thermostat

    Manual
  • Cordset

    Hardwired
  • Voltage

    120V
  • Ampere

    4.17 Amps
  • Condition

    New
CLICK HERE FOR SPEC SHEET
it-wotk-img

How It Works

The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.

The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!

BUY ENVI NOW

See How Easy the Envi Wall Mounted Panel Heater is to Install Yourself

Worried about paying to get a contractor to install your new Envi wall heater? Think again. Jason Cameron explains how the Envi wall heater is designed to be installed and set up at home by yourself in just 10 minutes or less.

BUY ENVI NOW
7

Get Yours Today and Join

300,000+ Satisfied Customers

Greatest heater ever!!

"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."

left-img-ready

World's Number One Wall Mounted Panel Heater

Get yours today and join the 300,000+ Satisfied Customers

BUY ENVI NOW
  • logo-1
  • logo-2
  • logo-3
  • logo-4
  • logo-5
pdf-img Download this envi PDF Guide for free!